Free Ply Calculator
Results
Each ply cures to 0.1879 mm at 58.0 % fiber volume.
Beyond the Live Calculator
The app loads fibers, resins and prepregs from your library and sends the result straight into a new lamina.
Create free accountHow the Ply Calculator Works
One step per tab: design values before the layup, a weighed coupon after the cure.
Design Values: thickness from areal weight
Fiber areal weight (FAW) is the fiber mass in one square meter of ply. Divide it by the fiber density and you get the thickness that fiber would have if it were packed solid. In the cured ply it fills only Vf of the thickness, so t = FAW / (ρf Vf). Enter the thickness instead and the calculator solves for Vf. The resin density then gives the ply density and the resin content by weight. This tab assumes no voids.
Measured Coupon: fiber, resin and voids
Weigh a cured coupon and measure it. Its mass and size give the areal weight per ply and the density. The fiber areal weight splits that mass into fiber and resin. Void content is how far the measured density falls below the density of a coupon with no voids, so fiber, resin and voids add up to 100%.