Free Ply Calculator

Cured ply thickness, Vf and resin content from areal weight or a weighed coupon. Sign up for more features.
Inputs
Enter
%
g/m²
g/cm³
g/cm³

Results

Each ply cures to 0.1879 mm at 58.0 % fiber volume.

By volume
By weight
FiberResinHover a part to compare it by volume and by weight.
Ply
t, ply thickness0.1879mm
ρc, ply density1.536g/cm³
TAW, ply areal weight288.7g/m²
Fractions
Wf, fiber by weight67.2%
Wm, resin content32.8%
RAW, resin areal weight94.71g/m²

Share
Next step: ply stiffness at this fiber volume fraction

Opens the micromechanics calculator with Vf = 58.0 % filled in.

Use this Vf

Beyond the Live Calculator

The app loads fibers, resins and prepregs from your library and sends the result straight into a new lamina.

Create free account
app.abdcomposites.com
CLIP loops

How the Ply Calculator Works

One step per tab: design values before the layup, a weighed coupon after the cure.

1

Design Values: thickness from areal weight

Fiber areal weight (FAW) is the fiber mass in one square meter of ply. Divide it by the fiber density and you get the thickness that fiber would have if it were packed solid. In the cured ply it fills only Vf of the thickness, so t = FAW / (ρf Vf). Enter the thickness instead and the calculator solves for Vf. The resin density then gives the ply density and the resin content by weight. This tab assumes no voids.

2

Measured Coupon: fiber, resin and voids

Weigh a cured coupon and measure it. Its mass and size give the areal weight per ply and the density. The fiber areal weight splits that mass into fiber and resin. Void content is how far the measured density falls below the density of a coupon with no voids, so fiber, resin and voids add up to 100%.

Frequently asked questions